Today I will
introduce two kinds of CREE
T6 LED headlamp to you which with a high quality and durability.
Please see the following detail introduction.
The beam of this
headlamp is orange peel reflector for flawless beam and the lens is
anti-shattering ultra clear lens, anti-scratching and anti-slip.The circuit
efficiency is 92% and the size is 50mm*42.5 mm. It has three modes: mac, low and
strobe. The max output of 1000 lumens for approximately 1.5 hours and min
output of 500 lumens for approximately 3 hours.It is easy to operate this
headlamp. Firstly, press the tail switch once and the light will turn on . With
the light turn on, press the tail switch, the brightness level will switch
between four modes. Remove tail cap, insert the batteries with the positive
ends toward the head of the light, replace the tail cap. There are some notes
you need to pay attention. Stated brightness and runtime figures are based on
tests using 2 pcs 18650 Li-ion batteries under laboratory conditions. Variances
in these figures will occur depending on batteries used and individual usage
habits.
This headlamp can
be fixed on the bicycle, as the lights used 2 with elastic rubber
hoods headlights when used with the lamp.The life expectancy of LED
can achieve 100000 hours. It has intelligent control circuits, third gear
dimming memory circuit. The light circuit is 2800 mA and the brightness is 1200
LM. Low light the circuit is 1500mA, brightness is 300 LM. Strong mode the
circuit is 2800mA, brightness is 1200 LM. It has vacuum plating cup orange
surface, high temperature, anti-shedding, concentrating effect perfect. It
enclosures with aviation aluminum alloy and it combined with 4*18650
batteries.It has a waterproof design, O-shaped ring, heavy rain is still normal
use. It can continue to work 4-6 hours.
没有评论:
发表评论